Tips caring Rem Disc Brake

Tips caring Rem Disc Brake

1.Disc Disc Brake cleaner
Every 10,000 km through a clean dust-dust disc with a cleaner form of liquids in a way disemprot. Dust and dirt will fall off. For maximum results, after disemprot, cloth with cloth.

2nd Sandpaper and bubut
Usually when the cover is 100,000 km, in addition to SIL-SIL brakes replaced, and the discus diampelas canvas so the surface remains flat. Could also distance the brake when it is caused because the sound of chirp canvas is thin, dusty disk or uneven surfaces.

If the disc is not flat, diatasinya with dibutut. But remember its maximum limit, if you are too thin or cracked, disk should be replaced.

3. Brake fluid
Content and change every 20,000 km climb. Brake fluid is too long, the higher water contents, especially the quality of brake fluid is less good. The result, more low boiling point brake does not result in good performance.

4. The quality of brake fluid
Brake fluid on the packaging have any posts DOT (Department of Tranportation) at the same time with numbers, it shows the level of consistency and didihnya point. Such as DOT 3, 4, and 5, the same as the difference kaliper rem 4 to 8 pot. The higher spek pot, the oil of the brakes, please use the DOT.

To be able to use standard brake DOT 3 or 4. Other penghenti system if the rate is modified to compensate for the energy of the engine, because the material used DOT5 using Silicon. In addition to high boiling point, does not easily evaporate.